back

Modular test systems

The concept of the modular test systems is achieved by modularising both – the test bench control including the safety technology and the test bench hardware. The Central Station (CS) is the brain of the modular concept. This is the main control for all test bench modules..
Central to our modular concept is the Central Station. This is the central control for all test bench modules.

Download: to brochure >

  • Easy configuration, also by the test operators

  • Low cabling effort

  • Simple plug concept

  • Simple configuration when the equirements change for the test bench

  • Traceability of the functioning through the test bench operator

  • Easy retrofitting

  • Can be combined as desired

  • Zero Config

  • Zero Programming

  • ACTERE software

  • Self diagnosis

The concept of modular test benches is achieved by modularizing both the test bench control and the test bench hardware.

l to our modular concept is the Central Station. This is the central control for all test bench modules.

The CS is equipped as standard with a lockable main switch, a service box (USB, network and 240 V socket), an emergency stop button and an operating mode switch. Visualisation and operation is done via keyboard, mouse and two 24” monitors.

By adding different modules, an individual test system is created that can be reconfigured again and again within the limits of the structural conditions by exchanging or adding modules. With the modular test system CS you already have the basis for the test system configuration of tomorrow.

The test stand hardware is divided into three categories.
Category 1 and Category 2 hardware connects directly to a connector panel on the Central Station.
Category 3 hardware is indirectly connected to the Central Station via a control cabinet. The control cabinets of the individual Category 3 modules are supplied with power from the Central Station.
Exceptions are category 3+ modules with high power consumption. These have their own feed.